Hamid Zahi

* Review project specifications, drawings, ITPs (Inspection & Test Plans), and applicable standards (ASME, ASTM, ISO) prior to starting inspection activities.
* Perform material receiving inspection (MRI) to verify compliance of incoming materials (pipes, fittings, valves, insulation materials, coatings, and rubber lining) with approved documents and material certificates.
* Ensure all inspection tools and measuring equipment are calibrated and valid before use.
* Monitor and inspect fit-up, alignment, and welding activities for piping and mechanical equipment in accordance with WPS/PQR and approved procedures.
* Conduct in-process inspections during fabrication and installation to ensure work is performed as per drawings and specifications.
* Verify surface preparation (cleanliness, profile, blasting) before painting or rubber lining application in accordance with required standards (e.g., SSPC, ISO 8501).
* Inspect painting and coating activities, including primer, intermediate, and final coats, ensuring correct DFT (Dry Film Thickness), application method, and curing conditions.
* Perform inspection of rubber lining works, ensuring proper surface preparation, lining application, adhesion, and curing as per specifications.
* Monitor installation of thermal insulation systems, including material type, thickness, cladding, and proper sealing.
* Witness and verify NDT activities (VT, PT, MT, RT, UT) and ensure acceptance criteria are met.
* Witness pressure testing (hydrotest/pneumatic test), ensuring test procedures, pressure gauges, and test limits comply with project requirements.
* Raise Non-Conformance Reports (NCRs) for any deviations and follow up on corrective and preventive actions until closure.
* Coordinate with contractors, supervisors, and client representatives to resolve quality issues and ensure compliance.
* Maintain and update inspection records, reports, and documentation (IRs, checklists, test reports).
* Participate in final inspection, punch listing, and system handover, ensuring all quality documents are compiled in the final dossier.

• Visual inspection of welds.
• Controls the installation of mechanical equipment according to the customer's specifications.
• Analysis of anomalies and non-standards.
• Control the installation of the tubes according to the isometric plans, and the hydro test package.
• Control and monitoring of insulation work (mechanical equipment + tubes).
• Generated inspection reports for continued evaluation and ongoing improvements.
• Inspected and tested products, parts and materials for conformity with specifications and standards.
• Recorded findings from inspections to determine quantities of defects and maintain accurate documentation.
• Conducted thorough inspections of premises, identifying safety hazards and compliance issues.
• Managed a team of junior inspectors, providing training and supervision to enhance performance.
• Successfully obtained required information from people using excellent communication skills, confidence, research techniques and charm.
• Responded promptly to emergency situations, coordinating with emergency services.

• Recommend preventive and curative actions.
• Checks the operation of tools and equipment.
• Carry out tests and functional tests.
• Coordinated with the operations department to schedule maintenance activities, minimising impact on fleet availability.
• Oversaw installation and commissioning of new mechanical equipment, ensuring compliance with technical specifications.
• Prepared detailed maintenance reports and documentation, providing transparency and facilitating decision-making.
• Developed and implemented preventive maintenance schedules, significantly reducing breakdowns and extending equipment lifespan.

• Visual inspection of welds.
• Daily schedule of tasks performed.
• Organisation of welding works.
• Respect for, and verification of, hygiene and safety rules.
• Before welding, check the appropriate parameters according to the pre-welding checklist.
• Respect for, and verification of, health and safety rules.
• Prepare the risk assessment of the task, taking into account the manufacturing and assembly activities, and ensure that all hazards and risks associated with these activities are taken into account.
• Ensures reports and follow-up on production data.
• Propose improvements in the organisation of work.
• Maintain team cohesion and motivation.
• Assign workstations, animate, and coordinate the work of the team.
• Train employees on procedures.
• Interpreted engineering drawings, blueprints, and specifications to guarantee welding quality control.
• Evaluated new welding equipment and technologies to enhance operational efficiency and product quality.
• Implemented quality control procedures to uphold high standards of workmanship throughout projects.
• Implemented quality control procedures for incoming stock, ensuring compliance with industry standards.
• Presented detailed quality control reports to senior management, providing insights for strategic decision-making.
• Conducted quality control inspections, ensuring all products met stringent company standards before dispatch.

• Coordinate and manage the teams on site.
• Ensure team safety.
• Monitors and participates in the improvement of operating results.
• Supervises and organises the preventive and corrective maintenance of wind turbines.
• Managed complaints with calm, clear communication and problem-solving.
• Identified issues, analysed information and provided solutions to problems.
• Trained and mentored employees to maximise team performance.
• Met schedule using excellent planning and coordination skills.
• Prepared range of written communications, documents and reports.

• Relays all the information necessary for the proper functioning of its teams.
• Supervision of construction activities on pipe welders, piping, and supports fabrication.
• Isometric verification and preparation of the cut list.
• Compliance with, and verification of, health and safety rules.
• Verification of the performance of welders and pipe fitters.
• Achieved service time and quality targets.
• Built and maintained courteous and effective working relationships.
• Resolved customer queries and problems using effective communication and providing step-by-step solutions.
• Actively listened to customers to fully understand requests and address concerns.
• Trained and mentored employees to maximise team performance.
• Promoted safe working environment by implementing regulatory standards, policies and guidelines.

• Coordinate the work with the client.
• Supervision of construction activities on the welder station, piping, and supports.
• Development and monitoring of schedules.
• Perform hardware receipt inspection and verification of hardware test certificates.
• Preparation and control of work permits.
• Completed pipe fittings and plumbing services to exceptional standards.
• Supervised installation, maintenance, and repair of industrial piping systems, adhering to strict safety protocols and project timelines.
• Monitored environmental impact, implementing sustainable practices in piping construction and maintenance.
• Analysed technical drawings and specifications to accurately locate and diagnose issues within the pipeline infrastructure.
• Scheduled and performed regular cleaning and pigging operations to remove debris and maintain optimal flow rates within pipelines.
• Coordinated with engineering teams to interpret technical drawings and specifications for accurate pipe system installations.
• Conducted risk assessments prior to undertaking maintenance tasks to identify and mitigate potential safety hazards.
• Inspected construction supplies and checked for material compatibility.
• Monitored pressure gauges and other instruments to detect abnormal operations and potential problems in pipe systems.

• Coordinate the work of subcontractors with scaffolding, painting, and installation to complete the work in the unit on time.
• Development and monitoring of schedules.
• Supervise, coordinate, and monitor the progress of the execution of the work on site.
• Preparation and control of work permits.
• Perform hardware receipt inspection and verification of hardware test certificates.
• Supervision of the site and implementation of the work according to the drawings and the specifications of the project.
• Applied protective coatings to pipelines to guard against rust, weather, and mechanical damage, extending their useful life.
• Supervised installation, maintenance, and repair of industrial piping systems, adhering to strict safety protocols and project timelines.
• Negotiated with suppliers to secure high-quality materials at competitive prices, optimising budget allocation.
• Achieved outstanding customer feedback by providing attentive service and ongoing support.
• Conducted routine inspections and maintenance of pipeline systems to prevent leaks and ensure operational efficiency.
• Conducted rigorous quality control inspections to verify the integrity and functionality of piping systems.

• Supervision of construction activities on pipe welder/piping and supports fabrication.
• Ensure team safety.
• Before welding, check the proper parameters according to the pre-welding checklist.
• Perform hardware receipt inspection, and verification of hardware test certificates.
• Daily schedule of tasks performed.
• Propose improvements in the organization of work.
• Maintain team cohesion and motivation.
• Preparation and control of work permits.
• Verification of the performance of welders and pipe fitters.

• Read the plans and determine the location, quantities, and dimensions of materials.
• Eliminate risks by identifying potential hazards.
• Install valves, fasteners, and attach pipes to structures.
• Repair the pipes using specialised welders.
• Perform hardware receipt inspection and verification of hardware test certificates.
• Ensure compliance with the construction schedule.
• Locally manage relations with subcontracting companies (maintenance, construction).
• Regularly inspect the sites to directly monitor the teams, the correct application of the rules on site, and the progress of the work.
• Set out and installed hot and cold water systems and associated equipment.
• Developed detailed project reports, documenting progress, challenges, and solutions to inform stakeholder decisions.

• Read the plans and determine the location, quantities, and dimensions of materials.
• Eliminate risks by identifying potential hazards.
• Install valves, fasteners, and attach pipes to structures.
• Clean the channels with special procedures.
• Repairs to pipes using specialised welders.
• Installed, maintained, and repaired industrial piping systems to uphold operational efficiency and safety standards.
• Modified and fabricated pipe components to meet specific project requirements, demonstrating problem-solving abilities.

• Applies applicable standards and rules in terms of health, safety, and environmental management.
• Meet production targets.
• Ensure compliance with the construction schedule.
• Secure a worksite area.
• Unload and move to the storage area.
• Install metal structural elements.
• Install gutters, downspouts, and guttering.
• Assemble elements of metal structures.
• Weld metallic elements.
• Guiding construction machinery.
• Coordinate the activity of a team.
• Maintained a safe and organised workspace, adhering to health and safety regulations to prevent accidents.

• Coordinate the activity of a team.
• Measures dimensions of the different elements by bending and oxy cutting.
• Prepare the materials specific to what is to be created while consulting the plans.
• Carry out the cuts and debitage of the elements.
• Take safety measures with regard to the installation, to be prepared.
• Make metal structures from plans.
• Carry out the assemblies in compliance with quality, safety, and environmental requirements.

• Coordinate the activity of a team.
• Meters to dimension the different elements by bending and oxy cutting.
• Prepare the materials specific to what is to be created while consulting the plans.
• Carry out the cuts and debitage of the elements.
• Take safety measures with regard to the installation, to be prepared.
• Make metal structures from plans.
• Carry out assemblies in compliance with quality, safety, and environmental requirements.
• Unload and move to the storage area.
• Install metal structural elements.
• Install gutters, downspouts, and guttering.
• Maintained a safe and organised workspace, adhering to health and safety regulations to prevent accidents.

• Coordinate the activity of a team.
• Meters to dimensions the different elements by bending, and ox cutting …
• Prepare the materials specific to what is to be created while consulting the plans.
• Carry out the cuts and debitages of the elements.
• Take safety measures with regard to the installation to be prepared.
• Make metal structures from plans.
• Carry out assemblies, in compliance with quality, safety, and environmental requirements.
• Unload and move to the storage area.
• Install metal structural elements.
• Install gutters, gutters, and downspouts.

• Coordinate the activity of a team.
• Meters to dimensions the different elements by bending, and ox cutting …
• Prepare the materials specific to what is to be created while consulting the plans.
• Carry out the cuts and debitages of the elements.
• Take safety measures with regard to the installation to be prepared.
• Make metal structures from plans.
• Carry out assemblies, in compliance with quality, safety, and environmental requirements.
• Unload and move to the storage area.
• Install metal structural elements.
• Install gutters, gutters, and downspouts.